Turbo kit for Fiat Coupe 20v Turbo up to 360 hp T3/T4 + exhaust manifold + WG
Item no: 420177
Contents:
1x metal gasket for T3 flange 2x metal gaskets for 38mm wastegate 1x gasket for T3/T4 oil return 1x high-pressure wide-band clamp 87-79mm for 76mm silicone 1x V-tape 63.5mm V2A 1x straight silicone reducer 76x60mm 1x turbocharger T3/T4 60A/R compressor side - 63A/R exhaust side - 360° racing 1x 38mm aluminum CNC-machined wastegate with accessories 0.4 bar 1x M12 ring eye to D04 1x HD wide-band clamp 71-63mm for 60mm silicone 1x silicone vacuum hose ø 6mm length 1x metal gasket for Y-pipe flange T3/T4, GT30, GT35 5-hole 5x stud bolts M10x40 4x stud bolts M8x35 1x adapter for oil supply to T3/T4 + GT30 + GT35, plain bearing 3mm 1x oil supply line 40cm with D04 fittings 5x copper nut M10 (17mm wrench size) 4x copper nut M8 (13mm wrench size) 1x turbo manifold Fiat Coupe 20v Turbo 20vT T3 + 38mm WG connection 1x 45° adapter 1/2 NPT > 15mm hose connection 1x elbow supplied in individual parts for self-welding. Photo is for illustration purposes only
We will customize the turbo for you so that it can be installed in the vehicle. Due to limited space in the engine compartment, you may still need to adjust the turbo yourself on the vehicle. To do this, simply loosen the screws on the turbo’s mounting plates and rotate the turbo into its final position. Then tighten the screws again.
rn
rnTechnical data for the turbocharger:
- Compressor housing, external A/R 60
- Compressor wheel 71>54.1 mm
- Turbine housing 63 A/R
- 360° racing bearings
- T3 flange (hole dimensions measured at center: 86x45mm)
- Oil-cooledrn
rn- Water-cooled
- The shaft is precision-balanced
- up to approx. 1.6 barrn
rnSuitable for:
- All Fiat Coupe/Marea/Bravo 20VT Turbo 5-cylinder models, including vehicles with air conditioning. To achieve an output of approx. 360 hp, larger fuel injectors (e.g., 440 cc) and a fuel pump rated at 255 L/h are required, and the software (chip) must be adjusted.
