Turbo kit / turbocharger T3/T60 <340hp for Fiat/Lancia 16v 8v Turbo Delta Integrale

Item no: 420155

Scope of delivery:
  1x T3/T60 T3/4 360 HP turbocharger with wastegate 60A/R-48A/R 360° racing bearings T3 flange 440104
  1x metal gasket for T3 flange
  1x aluminum pipe connector ø 60mm - L 80mm - 1.5mm wall thickness, flanged 271206
  1x HD wide-band clamp 87-79mm for 76mm silicone, made of stainless steel, 19mm wide
  1x V-band clamp 63.5mm 350106
  1x straight silicone reducer 76x60mm inner diameter blue L 100mm 4-layer 5mm wall thickness 380180
  1x HD wide-band clamp 71-63mm for 57-60mm silicone, made of stainless steel, 19mm wide
  1x elbow / downpipe cast for Fiat Coupe 2.0L 16v Turbo, Lancia Delta Integrale

---

---

Technical specifications turbocharger:
- Compressor housing outer ø 76mm inlet 60 A/R
- Compressor wheel 71>54mm
- Turbine housing 48 A/R
- Turbine wheel 64>48mm
-  360° racing bearings
- T3 flange (hole dimensions measured at center: 86x45mm)
- oil-cooled

---

- water-cooled
- Shaft is precision-balanced
- up to approx. 1.6 bar
- up to 340 HP

---

Suitable for:
- Fiat/Lancia 16v Turbo 4 cylinder 2.0 liter.
- Fiat/Lancia 8v Turbo with catalytic converter 4 cylinder 2.0 liter.

---

The old turbo is simply replaced with the new one. No welding necessary. Oil and water connections from the old turbo fit, however, the oil supply line should definitely be replaced. The original intercooler must be moved because the intake is 76mm and the original intake hose no longer fits.

---

Please note that installation of this item constitutes a modification that terminates the vehicle's operating permit under the StVZO. Not for use on public roads.

---

 

---

It may be possible to register the turbo kit in accordance with §21 StVZO following successful emissions, noise, and performance testing.