Turbo kit Fiat Coupe 20v Turbo up to 400 hp GT3076 + exhaust manifold + Wastegate up to 400 hp
Item no: 420173
Contents:
1x metal gasket for T3 flange 2x metal gaskets for 38mm wastegate 1x gasket for T3/T4 oil return 1x clamp, high-pressure wide-band clamp 116-104mm for 102mm silicone 1x clamp, V-band 63.5mm V2A 1x turbocharger GTR-485 (GT3076, GT30) 70A/R compressor side - 63A/R exhaust side 1x 38mm aluminum CNC-machined wastegate with accessories 0.4 bar 1x M12 ring eye to D04 1x HD wide-band clamp 71-63mm for 60mm silicone 1x silicone vacuum hose ø 6mm length 1x metal gasket for downpipe flange T3/T4, GT30, GT35 5-hole 5x stud bolts M10x40 1x straight silicone reducer 102x60mm 4x stud bolts M8x35 1x adapter for oil inlet on T3/T4 + GT30 + GT35 plain bearing 3mm 1x oil supply line 40cm with D04 fittings 5x copper nut M10 copper nut with 17mm wrench size 4x copper nut M8 copper nut with 13mm wrench size 1x turbo manifold Fiat Coupe 20v Turbo 20vT T3 + 38mm WG connection 1x adapter 45° 1/2 NPT > hose connection 15mm 1x elbow is supplied in individual parts for self-welding. Photo is for illustrative purposes only
We will customize the turbo for you so that it can be installed in the vehicle. Due to the limited space in the engine compartment, it may still be necessary to adjust the turbo manually on the vehicle. To do this, simply loosen the screws on the turbo's mounting plates and rotate the turbo into its final position. Then tighten the screws again.
rn
rnTechnical data turbocharger:
- Compressor housing outer A/R 70
- Compressor wheel 76>56.5mm
- Turbine housing 63 A/R
- 360° racing bearings
- T3 flange (hole dimensions measured at the center: 86x45mm)
- oil-cooledrn
rn- water-cooled
- Shaft is precision-balanced
- up to approx. 1.8 barrn
rnsuitable for:
- all Fiat Coupe/Marea/Bravo 20vt Turbo 5-cylinder, including vehicles with air conditioning. To achieve an output of approx. 400 hp, larger injectors, e.g. 440cc, a 255L/h fuel pump are also required and the software (chip) must be adjusted.
