Turbokit / Turbocharger T3/4 >380hp for Fiat/Lancia 16v 8v Turbo delta integrale

Item no: 420200

Scope of delivery:
 1x T3/T4 400 hp turbocharger with wastegate 60A/R-63A/R 360° racing bearing T3 flange 440106
  1x Metal gasket for T3 flange 170101
  1x Aluminum pipe connector ø 60mm - L 80mm - 1.5mm wall thickness flanged 271206
  1x HD wide-band clamp 87-79mm for 76mm silicone made of stainless steel 19mm wide
  1x V-band clamp 63.5mm 350106
  1x Straight silicone reducer 76x60mm inner diameter blue L 100mm 4-layer 5mm wall thickness 380180
  1x HD wide-band clamp 71-63mm for 57-60mm silicone made of stainless steel 19mm wide
  1x Elbow / Downpipe cast for Fiat Coupe 2.0L 16v Turbo, Lancia Delta Integrale
 

---

---

Technical Data Turbocharger:
- Compressor housing outside A/R 60
- Compressor wheel 71>54.1mm
- Turbine housing 63 A/R
-  360° degree racing bearing
- T3 flange (hole dimensions measured in the middle: 86x45mm)
- oil-cooled

---

- water-cooled
- Shaft is precision-balanced
- up to approx. 1.6 bar
- up to 400 hp

---

Description:
The original turbo is simply replaced with the new one. No welding necessary. Oil and water connections fit from the old turbo, however the oil supply line should definitely be renewed. The original intercooler must be relocated because the intake is 76mm and the original intake hose no longer fits.

---

Suitable for:
- Fiat/Lancia 16v Turbo 4 cylinder 2.0 liter.
- Fiat/Lancia 8v Turbo with catalytic converter 4 cylinder 2.0 liter.

---

We point out that installation of this item constitutes a modification which will void the vehicle's operating license under StVZO. Use on public roads is not permitted.

---

 

---

Possibly, after successful emissions, noise, and power measurement, the turbo kit can be registered under §21 StVZO.