Front intercooler kit for Audi S3 8L, TT 8N 550x230x65mm plug & play

Item no: 261113

Scope of delivery:
- 1 intercooler 550x230x65mm aluminum - connections 57.5mm intercooler
- 2 silicone reducer straight 60x57mm inner diameter blue L 100mm 4 layer 5mm walls
-  8 clamp HD wide band clamp 71-63mm for 60mm silicone made of stainless steel 19mm wide
- 2 silicone connectors straight ø 60 mm blue
- 2 matching aluminum tubes with flared edges in ø 60mm

---

suitable for:
- Audi S3 8L 209-225hp (also fits vehicles with headlight cleaning system, but not with fog lights)
- Audi TT 8N 225hp (also fits vehicles with headlight cleaning system, but not with fog lights)

---

Description:
The Audi S3 8L front intercooler kit was adapted directly to the vehicle. This ensures quick and easy installation. The aluminum pipes have an outer diameter of ø 60mm. The intercooler kit is installed in the front between turbocharger and intake manifold. It is suitable for the vehicles listed above. The aim of an intercooler is to cool down the air heated by the turbocharger. By cooling down the compressed air, more air mass enters the combustion chamber with the same volume and more fuel can be burned, thereby increasing the power output and efficiency. The lower the charge air, the lower the thermal load on the engine, the turbocharger, because it requires less speed for the same air mass. Fuel consumption is also reduced and the engine achieves slightly better exhaust values, provided the control unit is adapted accordingly. It is important to ensure that the intercooler gets as much airflow as possible. The intercooler kit offered here is completely made of aluminum with cast boxes, has 5 mounting points and a bar'n plate net. An output of up to approx. 450hp is possible. Ideal for motorsport and tuning. Each intercooler is tested to 5 bar before delivery.