Turbo kit for Fiat Coupe 20v + turbo up to 420 hp with Garrett GT2871R + exhaust manifold + Wastegate
Item no: 420206
Contents:
1x metal gasket for T3 flange 2x metal gaskets for 38mm wastegate 1x gasket for oil return T3/T4 GT40 1x HD wide-band clamp 87-79mm for 76mm silicone, stainless steel, 19mm wide 1x V-band clamp 63,5mm 1x straight silicone reducer 76x60mm inner diameter, blue, L 100mm, 4-ply, 5mm wall 1x 38mm aluminum wastegate, CNC-machined with accessories, 0.4 bar for VR6 16v turbo 1x M12 ring eye to D04 1x Clamp HD- wide band clamp 71-63mm for 57-60mm silicone, stainless steel, 19mm wide 1x silicone vacuum hose ø 6mm, length 1 meter, blue 1x metal gasket for Y-pipe flange T3/T4, GT30, GT35 5-hole 5x stud bolts M10x40 4x stud bolts M8x35 1x adapter for oil inlet on T3/T4 + GT30 + GT35, plain bearing 3mm M12x1.5 5x copper nut M10 (14 mm wrench size) 4x copper nut M8 (12 mm wrench size) 1x turbo manifold Fiat Coupe 20v Turbo 20vT T3 + 38 mm WG-connection exhaust manifold 1x adapter 45° 1/2 NPT > hose connection 15mm 1x elbow supplied in individual parts for self-welding. Photo is for illustrative purposes only 1x Oil supply line D04 7/16 UNF 90° + M12 ring eye Connections 50cm PTFE Teflon 1x Garrett GT2871R - 743347-5001S/5004S with T3 flange and 5-hole Y-pipe flange
We will customize the turbo for you so that it can be installed in the vehicle. Due to limited space in the engine compartment, you may still need to adjust the turbo yourself on the vehicle. To do this, simply loosen the screws on the turbo’s mounting plates and rotate the turbo into its final position. Then tighten the screws again.
Technical data for the turbocharger:
- Garrett GT2871R 743347-5002S
- Turbine housing 63A/R or 82A/R, optional
- Double ball bearings
- T3 flange (hole dimensions measured at center: 86x45mm)
- Oil-cooled
- Water-cooled
- The shaft is precision-balanced
- up to 475 hp
Suitable for:
- All Fiat Coupe/Marea/Bravo 20VT Turbo 5-cylinder models, including vehicles with air conditioning. To achieve an output of approx. 360 hp, larger fuel injectors (e.g., 440 cc) and a fuel pump rated at 255 L/h are required, and the software (chip) must be adjusted.
