Turbokit / Turbocharger Garrett GTX2871R for Fiat/Lancia 16v 8v Turbo Delta Integrale
Item no: 420216
Scope of delivery:
1x Garrett GTX2871R 836040-5005S 836040-5 up to 560 hp 440208
1x Adapter 1/2 NPT > Hose Connection 15mm 120125
1x Metal gasket for T3 flange 170101
1x Gasket for Oil Return GT
4x Copper gasket M14 14x18x1.5mm
1x Aluminum pipe connector ø 60mm - L 80mm - 1.5mm wall thickness, flanged 271206
1x HD wide-band clamp 87-79mm for 76mm silicone, stainless steel, 19mm wide
1x HD wide-band clamp 116-104mm for 102mm silicone, stainless steel, 19mm wide
1x V-band clamp 63.5mm 350106
1x Internal wastegate with 5-hole flange plate for T3/T4 + GT30 + GT28 turbocharger 460119
1x HD wide-band clamp 71-63mm for 57-60mm silicone, stainless steel, 19mm wide
1x Elbow / Downpipe cast for Fiat Coupe 2.0L 16v Turbo, Lancia Delta Integrale
4x Stud bolts M10x40 set screw
1x Straight silicone reducer 102x60mm inner diameter blue L 100mm 5-ply 6mm wall thickness 380795
1x Quick Tap for silicone hoses vacuum connection 6mm 600149
4x Copper nuts M10 made of copper with 14mm wrench size
1x Oil restrictor GT-R turbocharger M11x1mm to 7/16 UNF (Dash 04) with 0.9mm borehole 300128
1x Flange for oil return for GT-R ball bearing turbos GT28, GT28RS, GT2871R, GT30 200209
2x Adapter M14 male thread to M16 female thread
2x Hexagon screw M8 x 20 12.9
1x Retaining plate for turbo kit Lancia 16v T3/T4 T3/T60 GT28xx GT35xx
1x Actuator / Internal wastegate for T3/T4 turbocharger 1 connection 30cm long
1x PTFE oil supply line 50cm for 90° 7/16 UNF other side ring eye ø 14mm 300226
1x Exhaust housing ATP for GT28, GTX28 63 A/R Ford Style 5-hole for internal wastegate 441246
1x Mounting kit turbocharger for exhaust housing with 6 screws for GT25xx GT28xx, GT30xx,
Technical data turbocharger:
- Compressor housing outside A/R 60
- Turbine housing ATP optionally 63 A/R or 82A/R
- ball bearing
- T3 flange (hole dimensions measured at center: 86x45mm)
- Oil-cooled
- Water-cooled
- up to approx. 2 bar
- up to 560 hp
Suitable for:
- Fiat/Lancia 16v Turbo 4 cylinder 2.0 liter.
- Fiat/Lancia 8v Turbo with catalytic converter 4 cylinder 2.0 liter.
The old turbo is simply replaced with the new one. No welding necessary. Oil and water connections fit from the old turbo, but the oil supply line should definitely be replaced. The original intercooler must be relocated because the intake is 76mm and the original intake hose no longer fits.
Registration:
- For individual approval according to §21 StVZO, please contact our partner company Exclusive-Tuningparts e.K. at https://go-street-legal.com/
Please note that installing this item constitutes a modification that will void the vehicle operating permit under StVZO. Use on public roads is not permitted.
It may be possible to have the turbo kit registered under §21 StVZO following a successful exhaust, noise and performance measurement.
