DeatschWerks DW65v In-Tank Fuel Pump, 265 L/h, for VW and Audi 2.0 TFSI / TSI and 1.8T with front-wheel drive

Item no: 140111

DeatschWerks DW65v In-Tank Fuel Pump 265 L/h – VAG 1.8T & 2.0 TFSI / TSI (FWD)

The DeatschWerks DW65v is a high-performance, in-tank fuel pump specifically designed as a plug-and-play upgrade to meet the requirements of tuned VAG 1.8T and 2.0 TFSI / TSI engines with front-wheel drive (FWD).

With a flow rate of 265 liters per hour, this fuel pump provides a reliable fuel supply for engine outputs of 400HP+. It replaces the factory-installed in-tank pump directly in the stock housing and prevents the mixture from becoming too lean under high boost pressure.

Highlights & Features

• High flow rate: 265 liters per hour (265 L/h) for reliable fuel pressure in performance applications.

• Performance range: Optimally designed for tuning projects of 400PS+

• Precision-fit upgrade: Designed for direct installation in the original swirl pot/tank housing.

• Tested quality: Every DeatschWerks pump undergoes rigorous, multi-stage bench testing before shipment.

Vehicle Compatibility

The DW65v is compatible with all front-wheel-drive (FWD) models from the VAG Group equipped with 1.8T and 2.0 TFSI / TSI engines.

Compatible with (among others):

• Audi A3 (Type 8L) – 1.8T (front-wheel drive only)

• Audi TT (Type 8N) – 1.8T (front-wheel drive only)

• Seat Leon (Type 1M) – 1.8T (front-wheel drive only)

• VW Golf 4 (Type 1J) – 1.8T (front-wheel drive only)

• Other VAG 2.0 TFSI / TSI models with front-wheel drive (FWD)

• VW Golf 5 GTi (Year: 2004-2008 Engine: 2.0 TFSI / TSI) (front-wheel drive only)

• Important note: Not compatible with all-wheel-drive vehicles (Quattro / 4Motion)! If you need a DW65v for all-wheel-drive / Quattro vehicles, please order item: 140108

Highest quality through DeatschWerks testing procedures

To meet the highest quality standards and eliminate production deviations, every DeatschWerks fuel pump is subjected to a comprehensive, multi-stage performance test by trained technicians.

The test includes the following measured values:

1. Flow rate measurement at pressures of 40 psi, 60 psi, 80 psi and 100 psi

2. Current draw at the respective pressure levels

3. PRV activation point (Pressure Relief Valve)

4. Check of the check valve function

5. Cavitation analysis

6. Visual and technical final quality inspection

Scope of Delivery

• 1x DeatschWerks DW65v In-Tank Fuel Pump (265 L/h)

• 1x Vehicle-specific installation kit for VAG 1.8T / 2.0 TFSI (FWD)