16v turbo kit up to 250hp complete for Golf 1 2 3 16v

Scope of delivery:
1x adapter for oil pressure sensor, M10 female to M10 male with hole for oil inlet 1x adapter for oil inlet on T3/T4 + GT30 + GT35 with slide bearings, M1x adapter, M18>8mm hose connection 2x D10 nuts 1x D10 bulkhead 1x boost gauge up to 2 bar with accessories (smoke) 1x intake manifold for VW 16v Turbo Golf 1 2 3 + 16v G60 1x external fuel pump 225 L/h up to 6 bar 1x boost controller/mechanical boost regulator, silver 1x metal gasket for Y-pipe flange GT2560R, GT28RS, GT2871R, GT3071R 1x metal gasket for 38mm wastegate 1x gasket for GT oil return 2x copper gasket M22 22x27x1.5 1x fuel rail for VW 16v Turbo 1.8L + 2.0L 1x stainless steel weld-on ring 63.5-79mm 1x stainless steel flex pipe L 150mm 76mm with interlock 1x turbo manifold for Golf VW 16v nickel cast T3 flange + 38mm WG turbo manifold 4x stainless steel pipe elbow 90° 60mm V2A 1.6mm wall thickness 2x stainless steel pipe elbow 45° 60mm V2A 1x aluminum pipe connector T-piece 76>25mm - L 100mm - 1.5mm wall thickness, rolled edge 4x clamp 20-32mm 5x HD wide-band clamp 87-79mm for 76mm silicone, stainless steel, 19mm wide 1x HD wide-band clamp 116-104mm for 102mm silicone, stainless steel, 19mm wide 1x straight silicone reducer 76x60mm inner diameter blue L 100mm 4-ply 5mm wall thickness 1x silicone hose ⌀ 25mm inner diameter 1 meter blue 3-ply 4mm wall thickness 1x turbocharger T3/T60 T3/4 360hp with wastegate 60A/R-48A/R 360° racing bearing T3 flange 1x compression reduction plate for 1.8L 16v VW 1.5mm 1x blind plug for fuel pump 4x Bosch injector 315cc at 3 bar 0280158227 for VR6 16v Fiat Coupe Turbo etc 4x copper gasket M12 1x flange for 3-hole cat ⌀ 76mm stainless steel 1x intercooler 550x230x65mm aluminum - 57.5mm intercooler connections 1x ring eye M12 to D04 10x HD wide-band clamp 71-63mm for 57-60mm silicone, stainless steel, 19mm wide 1x straight silicone connector ⌀ 60mm blue 1x closure screw for weld-on nut M18x1.5mm 1x straight silicone connector ⌀ 76mm blue 1x adjustable fuel pressure regulator with gauge 0-10 bar 5x stud bolt M8x35 4x silicone elbow 90° 60mm inner diameter blue L 125mm 4-ply 5.5mm wall thickness 1x silicone elbow 90° 76mm inner diameter blue L 125mm 4-ply 5.5mm wall thickness 5x copper nut M8 nut made of copper with 12mm wrench size 1x blow-off valve Super Sound BOV Turbo 2x stainless steel pipe ⌀ 60mm L 1000mm 1 meter - wall thickness ⌀ 1.5mm 1x stainless steel pipe elbow 90° ⌀ 25mm V2A 1.5mm wall thickness 2x water pipe steel braided approx. 60cm with M14 ring eye - other side open ⌀ 12mm 1x oil pipe D10 approx. 55cm long, straight on both sides, D10 inner Teflon, outer stainless steel 2x clamp 10-16mm 2x T-piece 18-10-18 made of aluminum 1x compression fitting M8x1 D=1.5 for exhaust temperature gauge 1x Greisinger digital exhaust temperature gauge 1x temperature sensor ⌀ 1.5mm -100°C to +1000°C with 2 meter cable K-type (NiCrNi) 1x 16V turbo tuning for VW with G60 Digifant control unit12x1.5mm

---

Suitable for:
- all VW 16v engines 1.8 and 2.0 liters