Scope of delivery: - Intake manifold for VR6 Turbo cast aluminum with all connections for turbo conversion side outlet for old throttle bodyDescription: - The intake manifold was developed by us specifically for turbo conversions. It was adapted directly to the vehicle and is therefore very precise. It has a height from the cylinder head flange to the highest point on the throttle body flange of 13.3 cm. Because it is short, you get a quick response and significantly more power. The intake manifold can be supplied in any color for an additional 100 euros. For a further 150 euros, your own lettering is also possible. The manifold is pre-machined and drilled.Suitable for: - all VW VR6 12v engines 2.8 and 2.9 liters e.g. Golf 3 VR6, Passat VR6, Corrado VR6 etc.You get: - short runner intake manifold for VW Golf MK3 VR6 12v Turbo cast aluminum with OBD 1 throttle body connectorDescription: - The intake manifold was developed specifically for turbo conversions. It has been adapted directly to the vehicle and is thus a perfect fit. It has a height from the cylinder head flange to the highest point on the throttle body flange of 13.3 mm. Because it is short, you get a fast response and significantly more power. The intake manifold can be supplied in any color for an extra 100 euros. For another 150 euros, your own logo is also possible. The bridge is planned and drilled.suitable for: - all VW VR6 MK3, Passat VR6, Corrado VR6 2.8 and 2.9 litre