Turbocharger upgrade K04-015 for Audi A4, A6 1.8T, Passat 1.8T up to 260hp Compressor wheel 60>46,5mm - Turbine wheel 45>40mm

Scope of delivery: - Turbocharger upgrade K04-015 for Audi A4, A6 1.8T, Passat 1.8T up to 260hp Compressor wheel 60>46.5mm - Turbine wheel 45>40mm

---

Description:
- The turbocharger is installed in longitudinally mounted Audi / Seat / VW 1.8T engines, such as Audi A4 B5 1.8T or Passat 3B 1.8T. The turbo fits 1:1 and replaces the original. All connections are like original, except the turbo inlet is slightly 50mm. For this, this intake hose must be used: 380905 or 380906 It is necessary to adapt the software to the turbo. To achieve a power output of approx. 260hp, the following must be installed: Silicone intake hose, 380cc injectors, intercooler kit, upgrade manifold, 200 cell sport catalytic converter, min. 63.5mm downpipe and exhaust system. With the correct ECU tuning, up to 300hp is possible.

---

Please note that after replacing the turbocharger, the oil feed and return lines must be replaced. You can obtain these from your VAG dealer.
- Compressor wheel 60>46.5mm from milled aluminum block
- Turbine wheel 45>40mm
- Actuator opening pressure approx. 0.4 bar (Stronger actuator 0.7 bar is available under item no. 460139)

---

Suitable for:
- Audi A4 1.8T with engine codes AEB,APU,ARK, ANB, AJL, BFB, BEX, AVJ
- Audi A6 1.8T with engine codes AEB,APU,ARK,ANB,AJL, AWT
- Passat 1.8T with engine codes AEB, APU, ARK, ANB, AWT
- Also for small turbo conversions up to 1.8L such as G40, Fiat Punto/Uno Turbo, etc.

---

Optional matching parts:
- Silicone intake hose for Audi A4, A6 B5 B6 Passat 1.8T 150hp-193hp black ø 51mm turbo inlet ø 80mm MAF inlet 380906
- Silicone intake hose for Audi A4, A6 B5 B6 Passat 1.8T 150hp-193hp black ø 51mm turbo inlet 380905