Upgrade intercooler kit for Audi A4, A6 1.8T B6 black

Scope of delivery: - Aluminum intercooler, mesh dimensions LxWxH 460x250x50 mm (overall dimensions 730x240x50 mm)
-  3 aluminum tubes, 51 mm outer diameter
- 5 silicone hoses
-  Mount
- 10 clamps
- with MAP sensor connection
- see also photo

---

Compatible with:
- Audi A4 B6 1.8T 150–190 hp AVJ / BFB / BEX (minor adjustments are required and on vehicles with a secondary air pump, it must be repositioned and the fog lights will no longer fit)
- Audi A6 C5 1.8T 150–180 hp AEB/APU/ANB/AWT/ARK / AJL (minor adjustments are required and on vehicles with a secondary air pump, it must be repositioned and the fog lights will no longer fit)

Models before model year 2003 only in conjunction with OEM sensor 038 906 051D.

---

Description:
The intercooler kit is installed between the turbocharger and the intake manifold. It is compatible with the vehicles listed above. The purpose of an intercooler is to cool down the air heated by the turbocharger. By cooling the compressed air, more air mass enters the combustion chamber at the same volume and more fuel can be burned, thereby increasing power and efficiency. The lower the charge air temperature, the lower the thermal load on the engine and the turbocharger because it requires less RPM for the same air mass. Fuel consumption is also reduced and the engine achieves slightly better emissions values, provided the ECU is adjusted accordingly. It is important to ensure that the intercooler receives as much airflow as possible. The LLK kit offered here is made entirely of aluminum with cast tanks, has 4 mounting points and a Bar`n Plate core. Power output of up to approx. 350 hp is possible. Ideal for motorsport and tuning. Each intercooler is tested up to 5 bar before delivery.