Intercooler kit for Audi A4, A6 1.8T B5 C5 + Passat 3B up to 10% more power ø 51mm pipe diameter

Scope of delivery:
- Intercooler aluminum mesh size LxWxH 460x240x50mm (total dimensions 645x240x50mm)
-  2 pieces aluminum tubes ø 51mm outer diameter
- 5 pieces silicone hoses
- 2 brackets
- 10 clamps
-  see also photo
-  MAP sensor connection 

---

suitable for:
 
- Audi A4 B5 1.8T 150-180HP AEB / APU / AWT / AJL (not suitable for vehicles with secondary air pump)
- Audi A6 C5 1.8T 150-180HP AEB/APU/ANB/AWT/ARK / AJL
-  Passat 3B 1.8T 150HP AEB / APU / ANB / AWT

---

Description:
The intercooler kit is installed between the turbocharger and the intake manifold. It is suitable for the vehicles listed above. The aim of an intercooler is to cool down the air heated by the turbocharger. By cooling down the compressed air, more air mass enters the combustion chamber at the same volume and more fuel can be burned, thereby increasing the power output and efficiency. The lower the intake air, the lower the thermal load on the engine and the turbocharger, since it requires less speed for the same air mass. Fuel consumption is also reduced and the engine achieves slightly better emission values, provided the control unit is adapted accordingly. Make sure that the intercooler gets as much airflow as possible. The intercooler kit offered here is completely made of aluminum with cast boxes, has 4 mounting points and a bar’n plate core. Power output of up to approx. 350HP is possible. Ideal for motorsport and tuning. Each intercooler is tested to 5 bar before delivery.