76 mm downpipe with integrated 200-CPI metal catalytic converter for select BMW models with the N55B30 engine and pneumatic wastegate (PWG) manufactured through 06/2013.
Compatible with, among others, the BMW M135i (F20/F21), M235i (F22/F23), 335i (F30/F31/F34) and 435i (F32/F33/F36) with the corresponding N55 PWG configuration up to a production date of 06/2013.
Important: The BMW N55 has different turbocharger and wastegate configurations. This downpipe fits exclusively on the N55B30 up to model year 06/2013 with a pneumatic wastegate (PWG). Please be sure to check the actual production date and the installed wastegate type before placing your order.
1x Downpipe / Y-pipe Ø 76 mm
Integrated 200-CPI metal catalytic converter
4x lambda sensor connectors M18x1.5
Compatible with select BMW models equipped with the N55B30 engine and PWG turbocharger (up to model year 06/2013)
This BMW N55 downpipe with a 200-CPI metal catalytic converter was developed for performance-oriented vehicles with an N55B30 turbo engine and a pneumatically controlled wastegate (up to model year 06/2013).
The pipe diameter of Ø 76 mm allows for improved exhaust flow compared to the more restrictive stock exhaust system. This reduces exhaust backpressure and relieves thermal stress on the turbocharger, especially in vehicles with upgraded performance.
When used in conjunction with appropriately tuned engine software, the downpipe enhances the performance potential of the N55 engine. Depending on the vehicle, software version, and exhaust monitoring system, it may be necessary to adjust the engine software or the monitoring of the after-treatment lambda sensor after installation.
The downpipe is made of stainless steel and is designed to withstand the high thermal loads in the turbocharger area.
The connection flanges are intentionally made of steel. This reduces the risk of the flanges warping under extreme exhaust temperatures. The flange surfaces are additionally machined flat to ensure a clean and tight connection to the exhaust system. The downpipe features a total of 4 welded-in lambda sensor connections with M18x1.5 mm threads.
Two different wastegate systems were used in the BMW N55:
PWG – Pneumatic Wastegate (compatible with this downpipe): The earlier N55 version (up to model year 06/2013) features a pneumatic or vacuum-controlled wastegate. The wastegate actuator can be identified by a typical round vacuum port. This downpipe is intended exclusively for the PWG version.
EWG – Electronic Wastegate (Not compatible) The later N55 version (from approx. 07/2013 onward) features an electronically controlled wastegate with an electric actuator directly on the turbocharger. This downpipe is not compatible with the EWG version.
PWG and EWG turbochargers differ not only in their wastegate control but also in their design and the connection flange of the downpipe to the turbocharger. A downpipe designed for the PWG version cannot therefore be installed on a vehicle with an EWG turbocharger—and vice versa. The engine designation N55B30 alone is not sufficient to unambiguously determine the correct downpipe.
Suitable exclusively for vehicles with an N55B30 engine and PWG turbocharger manufactured up to June 2013:
BMW M135i (F20 / F21): N55B30 PWG – up to model year 06/2013
BMW M135i xDrive (F20 / F21): N55B30 PWG – up to model year 06/2013
BMW M235i (F22 / F23): N55B30 PWG – up to model year 06/2013 (if equipped with the PWG version)
BMW M235i xDrive (F22 / F23): N55B30 PWG – up to model year 06/2013 (if equipped with the PWG version)
BMW 335i (F30 / F31 / F34): N55B30 PWG – up to model year 06/2013
BMW 335i xDrive (F30 / F31 / F34): N55B30 PWG – up to model year 06/2013
BMW 435i (F32 / F33 / F36): N55B30 PWG – up to model year 06/2013 (if equipped with the PWG version)
BMW 435i xDrive (F32 / F33 / F36): N55B30 PWG – up to model year 06/2013 (if equipped with the PWG version)
This downpipe is intended exclusively for vehicles with an N55B30 engine manufactured up to 06/2013 and equipped with a pneumatic wastegate (PWG).
Please do not rely solely on the date of initial registration or the model year, especially for vehicles from the transition period between June 2013 and August 2013. The actual factory production date and the installed turbocharger/wastegate configuration are decisive:
PWG (compatible): round pneumatic vacuum port on the turbocharger (up to model year 06/2013)
EWG (not compatible): electric servomotor / electronic actuator module on the turbocharger (from model year 07/2013 onward)
If you are unsure, we recommend checking the wastegate type directly on the vehicle or using the vehicle identification number (VIN) before placing your order.