Y-pipe downpipe for Audi A4 A6 1.8T B5, Passat 1.8T 3B 3BG ø 76mm 3" ex turbo made of stainless steel

Scope of delivery:Stainless steel downpipe for 1.8T longitudinal

---

• 3" pipe routing
• 1.5 mm wall thickness
• Material 1.4301 stainless steel
• Interlock flexible pipes
• Selectable versions
• Lambda sensor connections at OEM position

• Without catalytic converter: Motorsport, without registration
• 100 cpsi: Motorsport, without registration
• 200 cpsi: Motorsport, without registration
• 200cpsi E: With material certificate 

Description:
- The downpipe sits between turbo and exhaust system. It bolts to the original turbo. It has a diameter of 76mm (original 54mm), an interlock flex pipe and brackets are installed. Due to the larger downpipe, the back pressure is reduced, the turbo is relieved and more power can be achieved, depending on the installed components up to 450hp. To connect to the original exhaust system a reducing sleeve from 76>54mm must be used, but larger exhaust systems are usually used during tuning.

---

During installation, make sure that the flange on the turbo is first fitted only lightly, then connect the DP to the exhaust, align it and then tighten the screws on the flange.

---

compatible with:
-  Audi A4 1.8T B5 (8E)
- Audi A4 2.0L 8E
- Audi A6 1.8T C5
- Skoda Superb 3U4 1.8T 150HP AWT
- Passat 1.8T B5 (Type 3B) 
- Passat 1.8T 5B GP (Type 3BG) AEB /APU /ANB 150HP

---

Notes:

---

Warning!

---

According to §19(2) STVZO, the operating permit of the vehicle expires if you

---

dummy catalytic converters, catalytic converter replacement pipes, downpipes without catalytic converter or without particulate filter

---

install since this will impair the exhaust and/or noise performance.