S3 8PA Sportback
Performance parts for Audi S3 8PA 2.0 TFSI Quattro
We offer a wide range of tuning parts for the Audi S3 8PA Sportback 2.0 TFSI Quattro. Most parts are plug-and-play, meaning the original part is replaced and the tuning part is reinstalled without modification or with minimal adjustment. This saves a lot of work, money, and time.
Turbocharger
The heart of the 2.0 TFSI, alongside the engine, is the turbocharger. We offer various turbocharger upgrade such as the K04-064 with a larger compressor wheel, turbine wheel, and reinforced turbo actuator plug and play, because weaker actuators can no longer maintain boost pressure above a certain level and begin to flutter, which is why stronger actuators are then required. As a rule of thumb, from an opening pressure of 0.5 bar, the actuator can achieve a holding pressure of approx. 1.3 bar, after which it begins to flutter. This makes a maximum of 300 hp possible. The turbocharger differs only slightly visually from the original. We carry original Borgwarner units as well as our own brand “Turbo-parts.de,” which we have now been successfully selling for over 13 years. These are all precision-balanced and have a long service life. So that the turbocharger can also receive enough exhaust gas, a correspondingly large exhaust manifold is required. For conversions with universal turbochargers, e.g. GT28 turbo or GT30 etc., a manifold is required that has the matching T25 or T3 flange; we also carry these in our range.
A turbocharger alone is not enough. Of course, the surrounding parts must also be replaced so that the optimal performance can be extracted from the engine.
Exhaust technology
To generate as little exhaust backpressure as possible, Downpipes with a larger pipe diameter, e.g. 76 mm, are required so that the turbo is relieved and less exhaust backpressure is generated. We also offer these with TÜV and with 200-cell or 100-cell sport catalytic converters.
To achieve a rich sound and so that enough exhaust gases can escape, we have various sports exhaust systems usually from Simons from Sweden with EC approval, i.e. these do not need to be registered and can be used completely legally in road traffic.
Intake
With upgrade turbochargers or performance-enhanced engines, the original intake hoses often contract, which leads to power loss. Here we offer fabric-reinforced silicone hoses e.g. boost pressure hoses that withstand the performance. To achieve greater airflow, larger intake with sport air filter as well as larger intake manifolds ensure optimal breathing. For certain conversions such as the K04-064 53049880064 turbo on a Golf 6 GTI, a diverter valve (SUV) conversion kit is required.
Power transmission
To transfer the power to the road, sport clutches are indispensable. We have complete kits with single-mass flywheel, pressure plate, friction disc with organic lining and release bearing that are also suitable for road use; sprung sintered metal discs are also suitable for the road, only unsprung ones are more recommended for motorsport.
Cooling
To get cool air into the engine, a larger intercooler kit or an upgrade intercooler required, because cooler air is denser and contains more air mass, which in turn leads to more power. This is particularly noticeable in summer or during longer motorway journeys. We also offer these with TÜV.
Engine technology
So that the engine can withstand certain power levels, forged pistons and reinforced connecting rods are installed. We have had good experiences with JE-Pistons and Wiseco.
upgrade turbo kits
For a complete solution, we have fully coordinated, preconfigured upgrade turbo kits with TÜV that include almost everything needed for the conversion.
Expert support with your purchase
Can’t you find the right part for your vehicle in the various categories, or are you not sure whether a selected part can be used on your car? Then do not hesitate and contact us! We are happy to advise you with a call to our phone number 041014809005 and together with you we will find the accessories you need for your tuning project. Outside our business hours, you are also welcome to send us your questions by email to the address info@turbo-parts.de send. We will then answer your request as quickly as possible and will then gladly accept your order in our shop in order to deliver your new product to you within a short time.
By the way, under Vehicle Search you will also find the right tuning parts for many other vehicle types, including e.g. for BMW, Lancia, Seat etc.
