Downpipe Y-pipe ø 76mm for Ford Focus ST225 RS500 made of stainless steel

Scope of delivery:- Downpipe 76mm for Ford Focus ST225 made of stainless steel

---

Description:
- The downpipe is located between the turbocharger and the exhaust system. It has a cross-section of 76mm. Inside the pipe from the turbo, there is an interlock flex pipe and 2 connections for lambda sensor M18x1.5mm as well as a bracket for the original mount. In the second pipe there are two connections for lambda sensors as well as brackets for the original mounting points. The flange surfaces are flat and made of steel, which prevents the surfaces from warping at high temperatures, as would be the case with stainless steel. The larger downpipe lowers back pressure, relieves the turbo, and allows for more power, depending on the components installed, up to 450 hp. A larger sport exhaust system is recommended.

---

We point out that the installation of this item constitutes a modification through which the operating permit of the vehicle under StVZO expires. Not permitted for use on public roads.

---

Technical specifications:
- Flange surfaces are flat
- Flanges made of steel
- Bracket for original mount
- Cat dummy ø 130mm length approx. 240mm
- Pipes made of stainless steel 1.4512
- two connections M18x1.5mm for lambda sensor

---

Suitable for:
- Ford Focus 2 ST 225 year 2005-2010
- Ford Focus 2 RS500

---

Optional:
- Sport cat / Racing cat 200 cell ø 102mm - L 250mm stainless steel metal cat with E-mark R103 up to Euro 5 & lambda sensor connection 340124