Turbokit / Turbocharger Garrett GT28RS <360hp for Fiat/Lancia 16v 8v Turbo Delta Integrale

Scope of delivery:
1. Garrett GT2860RS - 739548-1 GT28RS 63 or 82A/R with T3 flange and 5-hole Y-pipe flange 440127
2. HD wide-band clamp 87-79mm for 76mm silicone, made of stainless steel, 19mm wide
3. Clamp V-band 63.5mm 350106
4. Straight silicone reducer 76x60mm inner diameter blue L 100mm 4-ply 5mm wall thickness 380180
5. Internal wastegate with 5-hole flange plate for T3/T4 + GT30 + GT28 turbocharger
6. HD wide-band clamp 71-63mm for 60mm silicone, made of stainless steel, 19mm wide
7. Cast elbow for Fiat/Lancia 16v from turbocharger V-band 63.5mm to 4-hole
8. Adapter M14 external thread to M16 internal thread

---

Technical specifications turbocharger:
- Compressor housing external A/R 60
- Turbine housing ATP optionally 63 A/R or 82A/R
-  ball bearing
- T3 flange (hole dimensions measured at center: 86x45mm)
- oil-cooled

---

- water-cooled
- up to approx. 1.6 bar
- up to 360hp

---

fits for:
- Fiat/Lancia 16v Turbo 4 cylinder 2.0 liter.
- Fiat/Lancia 8v Turbo with catalytic converter 4 cylinder 2.0 liter.

---

The old turbo is simply replaced with the new one. No welding necessary. The oil and water connections from the old turbo fit, but the oil supply line should definitely be replaced. The original intercooler must be repositioned because the intake is 76mm and the original intake hose no longer fits.

---

Please note that the installation of this item is a modification that will invalidate the vehicle's operating license in accordance with StVZO. Not permitted for use on public roads.

---

 

---

It may be possible to have the turbo kit registered in accordance with §21 StVZO following successful emissions, noise and performance testing.