upgrade intercooler for Mini Cooper S 1.6 Kompressor R50 R53 R52

Scope of delivery: - upgrade intercooler for Mini Cooper S 1.6 Kompressor  R50 R53, aluminum

---

Technical data:
- Net dimensions in mm 305 x 230 x 60
- Overall dimensions in mm 420 x 230 x 60
- more power due to cooler air
- Radiator has 4 mounting points: adjustment work may be necessary.

---

suitable for:
- Mini Cooper S 1.6 R50 R53 163hp
- Mini Cooper S 1.6 R50 R53 170hp
-  Mini S Works R50 R53 200hp
- Mini Works R50 R53 210hp
- Mini John Cooper Works R50 R53 218hp

---

Description:
The upgrade intercooler is installed above the engine, between the turbocharger and the intake manifold. It is simply replaced 1:1 with the original one. The aim of an intercooler is to cool down the air heated by the turbocharger. By cooling down the compressed air, more air mass enters the combustion chamber with the same volume and more fuel can be burned, which increases the power output and efficiency. The lower the charge air, the lower the thermal load on the engine, the turbocharger because it requires less speed for the same air mass. Fuel consumption is also reduced and the engine achieves slightly better exhaust values, provided the control unit is adapted accordingly. It is important to ensure that the intercooler gets as much airflow as possible. The coolers can be used on turbocharged diesel and petrol engines. When selecting the intercooler, care should be taken to ensure that it is not too large for the engine, as this would impair the response behavior; it should not be too small either. The intercooler offered here is made entirely of aluminum with cast boxes and has a bar'n plate mesh, ideal for motorsport and tuning. Each intercooler is tested to 5 bar before delivery.