Exhaust gas temperature gauge digital with accessories up to 1200°C 3 meter cable 3mm probe

Digital Exhaust Temperature Gauge – Type K, 3mm INCONEL

This digital exhaust gas temperature display is designed for precise monitoring of exhaust gas temperature in systems subjected to high thermal and mechanical stress. The system consists of a digital LED display, a vibration-resistant sheathed thermocouple made of INCONEL, and the appropriate M8 compression fitting for a gas-tight installation in the exhaust manifold or downpipe.

Thanks to the combination of the robust 3mm sensor with a heat-resistant glass-silk cable (up to 400°C), this set is ideally suited for use near the engine, where conventional components with silicone cables exceed thermal stress limits.

Technical Specifications:

1. Digital display

• Power supply: 12V or 24V DC (flexibly adjustable via integrated solder jumper)

• Illumination: LED display, red (high contrast, easily readable even at night)

• Mounting dimensions (cutout): 45 mm x 22 mm

• Housing dimensions: Width: 48 mm | Height: 24 mm | Depth: 65 mm

2. Exhaust gas temperature sensor (probe)

• Sensor element: NiCr-Ni (Type K) according to DIN EN 60584

• Measuring range: -200°C to +1200°C

• Sensor tube dimensions: 3.0 mm x 100 mm

• Sheath material: INCONEL (high-temperature-resistant nickel-chromium-based alloy)

• Flexibility: Flexible, minimum bend radius: 15 mm

• Connection cable: 3.0 m glass-fiber cable with stainless steel braiding (shortening permitted)

• Cable temperature resistance: Max. 400°C

3. Installation component (connection)

• Thread: M8 x 1.0

• Nominal diameter: 3.0 mm (cutting ring/clamp fitting)

Design and Safety Instructions:

• Installation depth: The maximum immersion depth of the sensor into the exhaust stream is 10 mm, to minimize flow resistance and leverage effects during high-frequency vibrations.

• Signal extension: If the 3-meter cable needs to be extended, this must be done exclusively using specified thermocouple connectors (Type K) to prevent measurement errors caused by thermoelectric interference.

• Installation: Installation and connection to the vehicle electrical system require qualified technical personnel.

Scope of delivery:

• 1x Digital Exhaust Gas Temperature Gauge (red LED illumination)

• 1x Premium exhaust gas temperature sensor, Type K (Ø 3 mm, INCONEL material) with 3 m glass-fiber-reinforced cable

• 1x compression fitting (M8x1 for 3.0 mm sensor)

•  

Suitable for:

• All turbocharged vehicles: Universally applicable for turbocharged gasoline engines (e.g., TFSI, TSI, 1.8T, biturbo) and diesel engines (TDI) for real-time monitoring of the turbocharger’s thermal load limit.

• Vehicles with 12V and 24V electrical systems: Thanks to the adjustable solder bridge, the kit can be flexibly used for passenger cars as well as trucks, commercial vehicles, or marine applications.

• Applications with high exhaust manifold ambient temperatures: Specifically for performance-enhanced engines and motorsport conversions where the radiant heat in the area of the exhaust manifold exceeds the temperature resistance of standard silicone cables (max. 200°C).

• Flexible interior installation: The display’s compact housing dimensions allow for discreet integration into the dashboard, the center console, or using a mount on the A-pillar. The 3-meter-long sensor cable ensures easy routing from the engine compartment to the cockpit.