Turbo kit for Fiat Coupe 20v Turbo with Garrett GT2871R turbocharger upgrade up to 420 hp

Contents:
1. Garrett GT2871R 743347-5002S / 5004S ball-bearing mounted + water-cooled

---

2. Downpipe adapter compatible with the original downpipe

---

3. Oil inlet adapter/oil restrictor + oil line

---

4. Oil return flange with connection to the original return line

---

5. Silicone reducer 76>60mm

---

6. Clamps + Screws

---

Technical data for the turbocharger:
- Compressor housing, external A/R 60
- Compressor wheel 71>53.1 mm
- Turbine housing 86 A/R
- Double ball bearings
- T25 flange (hole dimensions measured at center: 73x40mm)
- Oil-cooled

---

- Water-cooled
- The shaft is precision-balanced
- up to approx. 2 bar
- up to 475 hp

---

Description:
The ball-bearing-equipped upgrade turbocharger Garrett GT2871R is simply swapped out for the original turbocharger. No modification work or welding is required. The kit includes a special downpipe flange, that fits directly onto the original downpipe. Thanks to the ball bearings, the turbo responds very early. Maximum power output with this turbo is approximately 420 hp; to achieve this, larger fuel injectors,  a ø 70mm downpipe, a 255L/h fuel pump, a 100-cell catalytic converter, a sport exhaust ø 70mm and an upgraded intercooler, must be used. To ensure the engine can withstand the power, steel connecting rods  and forged pistons are required. The engine management system must then be adapted to these components.

We will customize the turbo for you in such a way that it can be installed in the vehicle. Due to the limited space in the engine compartment, it may still be necessary to adjust the turbo yourself on the vehicle. To do this, simply loosen the screws on the turbo's mounting plates and rotate the turbo into its final position. Then tighten the screws again.

---

Suitable for:
- all Fiat Coupe 20v Turbo 5-cylinder models.

---

Note: The above-mentioned turbocharger is intended for motorsports and does not correspond to any manufacturer-approved version. If installation alters the vehicle's performance specifications, the general operating permit and insurance coverage will be void. Therefore, no warranty can be provided. We are also not liable for consequential damages.

---