Product description
Contents:
1. Garrett GT28RS 739548-5005S ball-bearing mounted + water-cooled
2. Downpipe adapter compatible with the original downpipe
3. Oil inlet adapter/oil restrictor + oil line
4. Oil return flange with connection to the original return line
5. Silicone reducer 76>60mm
6. Clamps + Screws
Technical data for the turbocharger:
- Compressor housing, external A/R 60
- Compressor wheel 60>47.2 mm
- Turbine housing 64 A/R
- Double ball bearings
- T25 flange (hole dimensions measured at center: 73x40mm)
- Oil-cooled
- Water-cooled
- The shaft is precision-balanced
- up to approx. 1.6 bar
- up to 360 hp
Description:
The ball-bearing-equipped upgrade turbocharger Garrett GT28RS is simply swapped out for the original turbocharger. No modifications or welding required. The kit includes a special downpipe flange, that fits directly onto the original downpipe. Thanks to the ball bearings, the turbo responds very quickly. The maximum power output with this turbo is approximately 340 hp; to achieve this, larger fuel injectors, a 70mm downpipe, a 255 L/h fuel pump, a 100-cell catalytic converter, a 70mm sport exhaust and an upgraded intercooler, must be used. It is recommended to install steel connecting rods and forged pistons . The engine management system must then be adapted to these components.
We will customize the turbo for you in such a way that it can be installed in the vehicle. Due to limited space in the engine compartment, you may still need to adjust the turbo yourself on the vehicle. To do this, simply loosen the screws on the turbo’s mounting plates and rotate the turbo into its final position. Then tighten the screws again.
Fits for:
- all Fiat Coupe 20v Turbo 5-cylinder models.
Note: The above-mentioned turbocharger is intended for motorsports and does not correspond to any manufacturer-approved version. If installation alters the vehicle’s performance specifications, the general operating permit and insurance coverage will be void. Therefore, no warranty can be provided. We are also not liable for consequential damages. Manufacturer informationTurbo-parts
Ziegeleiweg 26
25421 Pinneberg
info@turbo-parts.de, https://turbo-parts.de