Turbo kit for Fiat Coupe 20v Turbo with turbocharger GTR-2571 upgrade up to 320 hp

Contents:
  1x Adapter 1/2 NPT > 16mm hose connection
  1x Metal gasket for T25/T28 flange
  1x Gasket for GT oil return
  1x HD wide-band clamp 87-79mm for 76mm silicone made of stainless steel 19mm wide
  1x Straight silicone reducer 76x60mm inner diameter blue L 100mm 4-ply 5mm wall
  1x Turbocharger GTR-2571R (GT25) 360HP T25 Wastegate 60 A/R-49A/R 360° racing bearing
  2x Copper gasket M12
  1x V2A flange for Fiat Coupe 20v on original downpipe with GTR-25 turbocharger
  1x Ring eye M12 to D04
  1x Retaining plate wastegate fresh air housing for GT28xx GT35 turbocharger
  1x HD wide-band clamp 71-63mm for 60mm silicone made of stainless steel 19mm wide
  1x Adapter for oil inlet on GT25 GTR-2871 3mm bore
  7x Countersunk screw M8x20
  1x Metal gasket for downpipe flange GTR-25, GTR-2571, GTR-2582 with 49A/R
  1x Oil inlet line  D04 7/16 UNF 90° + D04 straight connectors 50cm PTFE Teflon
  1x Flange for oil return for GT-R ball-bearing turbos with 1/2 NPT female thread

---

Technical data turbocharger:
- Compressor housing outer A/R 60
- Compressor wheel 71>54.13mm
- Turbine housing 49 A/R
-  360° degree motorsport bearing
- T25 flange (hole dimensions measured from center: 73x40mm)
- oil-cooled

---

- water-cooled
- Shaft is finely balanced
- up to approx. 1.6 bar
- up to 360HP

---

Description:
The upgrade turbocharger GTR-2571 is simply exchanged for the original turbocharger. No modification work, no welding necessary. A special downpipe flange is included in the kit, which fits directly to the original downpipe. Due to the small exhaust housing of 49A/R it responds early.  The maximum power with this turbo is approx. 320HP; to achieve this, larger injectors,  a 255L/h fuel pump and upgrade intercooler must be used. The engine management must then be adapted to the components.

We adapt the turbo for you in such a way that it can be installed in the vehicle. Due to the limited space in the engine bay, it may happen that you still have to adjust the turbo yourself on the vehicle. To do this, simply loosen the screws on the retaining plates of the turbo and turn the turbo within itself into the final position. Then tighten the screws again.

---

Suitable for:
- all Fiat Coupe 20v Turbo 5-cylinder.

---

Note: The above-mentioned turbocharger is intended for motorsport and does not correspond to a version approved by the manufacturer. If the installation changes the vehicle's performance data, the general operating permit and the insurance coverage expire. Therefore, no warranty can be assumed. We are also not liable for consequential damage.