Turbo kit for Fiat Coupe 20v + turbo up to 420 hp with Garrett GT2871R + exhaust manifold + Wastegate

Contents:
  1x metal gasket for T3 flange  2x metal gaskets for 38mm wastegate  1x gasket for oil return T3/T4 GT40  1x HD wide-band clamp 87-79mm for 76mm silicone, stainless steel, 19mm wide  1x V-band clamp 63,5mm  1x straight silicone reducer 76x60mm inner diameter, blue, L 100mm, 4-ply, 5mm wall  1x 38mm aluminum wastegate, CNC-machined with accessories, 0.4 bar for VR6 16v turbo  1x M12 ring eye to D04  1x Clamp HD- wide band clamp 71-63mm for 57-60mm silicone, stainless steel, 19mm wide  1x silicone vacuum hose ø 6mm, length 1 meter, blue  1x metal gasket for Y-pipe flange T3/T4, GT30, GT35  5-hole  5x stud bolts M10x40  4x stud bolts M8x35  1x adapter for oil inlet on T3/T4 + GT30 + GT35, plain bearing 3mm M12x1.5  5x copper nut M10 (14 mm wrench size)  4x copper nut M8 (12 mm wrench size)  1x turbo manifold Fiat Coupe 20v Turbo 20vT T3 + 38 mm WG-connection exhaust manifold  1x adapter 45° 1/2 NPT > hose connection 15mm  1x elbow supplied in individual parts for self-welding. Photo is for illustrative purposes only  1x Oil supply line  D04 7/16 UNF 90° + M12 ring eye  Connections 50cm PTFE Teflon  1x Garrett GT2871R - 743347-5001S/5004S with T3 flange and 5-hole Y-pipe flange

We will customize the turbo for you so that it can be installed in the vehicle. Due to limited space in the engine compartment, you may still need to adjust the turbo yourself on the vehicle. To do this, simply loosen the screws on the turbo’s mounting plates and rotate the turbo into its final position. Then tighten the screws again.

---

Technical data for the turbocharger:
- Garrett GT2871R 743347-5002S
- Turbine housing 63A/R or 82A/R, optional
- Double ball bearings
-  T3 flange (hole dimensions measured at center: 86x45mm)
- Oil-cooled

---

- Water-cooled
- The shaft is precision-balanced
- up to 475 hp

---

Suitable for:
- All Fiat Coupe/Marea/Bravo 20VT Turbo 5-cylinder models, including vehicles with air conditioning. To achieve an output of approx. 360 hp, larger fuel injectors (e.g., 440 cc) and a fuel pump rated at 255 L/h are required, and the software (chip) must be adjusted.