Turbo kit/turbocharger for Fiat Coupe 20v Turbo GTR-25

Contents:
1. GTR-25 turbocharger

---

---

---

2. Downpipe adapter compatible with the original downpipe

---

3. Oil inlet adapter

---

4. Oil return flange with connection to the original return line

---

5. Steel braided oil supply line

---

6. Gaskets

---

Turbocharger technical specifications:
- Compressor housing outer diameter A/R 42
- Turbine housing 49 A/R
- 360° racing bearings
- T25 flange (hole dimensions measured at center: 73x40mm)
- oil-cooled

---

- water-cooled
- The shaft is precision-balanced
- up to approx. 1.6 bar
- up to 300 hp

---

Description:
The GTR-25 turbocharger is slightly larger than the original turbocharger; it is simply replaced with the original turbocharger. No modification work, no welding required. The kit includes a special downpipe flange that fits directly onto the original downpipe. It can be operated without software adjustment, but to achieve the maximum power of approx. 300 hp with this turbo, a 255 L/h fuel pump must be used and the software adjusted.

We adapt the turbo for you so that it can be installed in the vehicle. Due to the limited space in the engine compartment, it may still be necessary to adjust the turbo yourself on the vehicle. To do this, simply loosen the screws on the turbo's retaining plates and rotate the turbo into its final position. Then tighten the screws again.

---

Suitable for:
- all Fiat Coupe/Kappa 20vt Turbo 5-cylinder.