Turbokit / Turbocharger T3/4 >380hp for Fiat/Lancia 16v 8v Turbo delta integrale

Scope of delivery:
 1x Turbocharger T3/T4 400hp with wastegate 60A/R-63A/R 360° racing bearings T3 flange 440106
  1x Gasket metal for T3 flange 170101
  1x Aluminum pipe connector ø 60mm - L 80mm - 1.5mm wall thickness flanged 271206
  1x Clamp HD wide band clamp 87-79mm for 76mm silicone made of stainless steel 19mm wide
  1x Clamp V-band 63.5mm 350106
  1x Silicone reducer straight 76x60mm inner diameter blue L 100mm 4-ply 5mm wall thickness 380180
  1x Clamp HD wide band clamp 71-63mm for 57-60mm silicone made of stainless steel 19mm wide
  1x Elbow / downpipe cast for Fiat Coupe 2.0L 16v Turbo, Lancia Delta Integrale
 

---

---

Technical data turbocharger:
- Compressor housing exterior A/R 60
- Compressor wheel 71>54.1mm
- Turbine housing 63 A/R
-  360° degree racing bearings
- T3 flange (hole dimensions measured center: 86x45mm)
- oil-cooled

---

- water-cooled
- Shaft is finely balanced
- up to approx. 1.6 bar
- up to 400hp

---

Description:
The original turbo is simply replaced with the new one. No welding necessary. Oil and water connections fit from the old turbo, however, the oil supply line should definitely be renewed. The original intercooler must be relocated because the intake is 76mm and the original intake hose no longer fits.

---

suitable for:
- Fiat/Lancia 16v Turbo 4 cylinder 2.0 liter.
- Fiat/Lancia 8v Turbo with catalytic converter 4 cylinder 2.0 liter.

---

We would like to point out that the installation of this article constitutes a modification, which will invalidate the vehicle’s operating license in accordance with the StVZO. Not permitted for use on public roads.

---

 

---

It may be possible to register the turbo kit according to §21 StVZO after successful exhaust, noise, and performance measurement.