Garrett Turbo kit for Fiat Coupe 20v Turbo with Garrett GTX2867R turbocharger upgrade up to 420 hp

Contents:
1. Garrett GTX2867R 816366-5001S turbocharger ball-bearing mounted + water-cooled exhaust housing 64 A/R or 86 A/R please specify when ordering

---

2. Downpipe adapter compatible with the original downpipe

---

3. Oil inlet adapter/oil restrictor + oil line

---

4. Oil return flange with connection to the original return line

---

5. Silicone reducer 76>60mm

---

6. Clamps + Screws

---

Technical data for the turbocharger:
- Compressor housing external A/R 60
- Compressor wheel 67>49.7mm
- Turbine housing 64A/R or 86A/R optionally specify when ordering
- Double ball bearings
- T25 flange (hole dimensions measured at center: 73x40mm)
- oil-cooled

---

- water-cooled
- Shaft is precision-balanced
- up to approx. 2 bar
- up to 480 hp

---

Description:
the ball-bearing upgrade turbocharger Garrett GTX2860R is simply exchanged for the original turbocharger. No welding work required. A special downpipe flange is included in the kit, which fits directly to the original downpipe. Thanks to the ball bearing, the turbo responds very early. The maximum power with this turbo is approx. 400 hp, to achieve this larger injectors,  ø 70mm downpipe, a 255L/h fuel pump, 100 cell cat, sport exhaust ø 70mm and upgrade intercooler, must be used. So that the engine can withstand the power, steel connecting rods  and forged pistons are required. The engine management must then be adapted to the components.

We adapt the turbo for you in such a way that it can be installed in the vehicle. Due to the limited space in the engine bay, it may still be necessary to adjust the turbo manually on the vehicle. To do this, simply loosen the screws on the mounting plates of the turbo and rotate the turbo into its final position. Then tighten the screws again.
  

---

Suitable for:
- all Fiat Coupe 20v Turbo 5 cylinder.

---

Note: The above-mentioned turbocharger is intended for motorsport and does not correspond to a version approved by the manufacturer. If installation changes the vehicle's performance data, the general operating permit and insurance coverage expire. Therefore, no warranty can be assumed. We are also not liable for consequential damage.