Product description
Scope of delivery:
1x Garrett GT2554R 471171-5003S replaced by 836023-5001S GT25 ball-bearing 440121
1x metal gasket for T3 flange
1x Oil Return Gasket for GT
4x copper gaskets, M14, 14x18x1.5 mm
1x Flange for compressor-side outlet GT2560R, GT28R, GT2871R with 51mm pipe connectors 200127
1x V-band clamp 63.5 mm 350106
1x Silicone Elbow Reducer, 45°, 19x16 mm inner diameter, blue, L 100 mm, 4 mm wall thickness
1x Internal wastegate with 5-hole flange plate for T3/T4 + GT30 + GT28 turbochargers 460119
1x HD wide-band clamp, 71–63 mm, for 57–60 mm silicone, made of stainless steel, 19 mm wide
1x Elbow / Downpipe, cast, for Fiat Coupe 2.0L 16v Turbo, Lancia Delta Integrale
4x stud bolts M10x40 with threaded shank
1x Quick Tap for silicone hoses, vacuum connection 6 mm 600149
4x M10 copper nuts with a 14 mm wrench size
1x Oil Restrictor for GT-R Turbocharger M11x1mm to 7/16 UNF (Dash 04) with 0.9mm bore 300128
1x 45° 1/2 NPT > 15 mm hose connector adapter 120183
1x Oil Return Flange for GT-R Ball-Bearing Turbos GT28, GT28RS, GT2871R, GT30 200209
2x adapters: M14 male thread to M16 female thread
1x Wastegate Actuator / Internal Wastegate for T3/T4 Turbochargers 1 connection, 30 cm long
1x PTFE oil supply line, 50 cm, for 90° 7/16 UNF, other end with ring eye, ø 14 mm 300226
1x ATP exhaust housing for GT2554R / GT2560R 48 A/R Ford-style 5-hole for internal wastegate 441247
1x Mounting Plate for Turbo Kit Lancia 16v GT2554R T3
Technical specifications for the turbocharger:
- Compressor housing outer diameter A/R 60
- ATP turbine housing with 48 A/R
- ball-bearing mounted
- T3 flange (hole dimensions measured at center: 86x45 mm)
- Oil-cooled
- water-cooled
- up to approx. 1.6 bar
- up to 270 PS
Compatible with:
- Fiat/Lancia 16v Turbo 4-cylinder 2.0-liter.
- Fiat/Lancia 8v Turbo with catalytic converter, 4-cylinder, 2.0-liter.
The old turbo is simply swapped out for the new one. No welding required. The oil and water connections from the old turbo fit, but the oil supply line should definitely be replaced. The OEM intercooler must be repositioned because the intake has a 76 mm diameter and the OEM intake hose no longer fits.
Please note that installing this product constitutes a modification that will void the vehicle’s operating permit under the StVZO. Use on public roads is not permitted.
It may be possible to register the turbo kit under §21 of the StVZO following successful emissions, noise, and performance testing. Manufacturer informationTurbo-parts
Ziegeleiweg 26
25421 Pinneberg
Deutschland
info@turbo-parts.de, https://turbo-parts.de