Turbo kit Fiat Coupe 20v Turbo up to 450 hp GT3082HF + exhaust manifold + WG up to 450 hp

Package contents:
  1x metal gasket for T3 flange  2x metal gaskets for 38 mm wastegate  1x gasket for T3 oil return/T4  1x high-pressure wide-band clamp 116–104 mm for 102 mm silicone  1x V-band clamp 63.5 mm V2A  1x 38 mm aluminum wastegate, CNC-machined, with accessories 0.4 bar  1x M12 ring eye to D04  1x HD wide-band Clamp 71–63 mm for 60 mm silicone  1x silicone vacuum hose, 6 mm diameter, length  1x metal gasket for Y-pipe flange T3/T4, GT30, GT35  5-hole  1x turbocharger GTR-525 HF (GT3082, GT30/40 ) 70A/R 360° racing bearings  5x stud bolts M10x40  1x straight silicone reducer 102x60mm  4x stud bolts M8x35  1x adapter for oil supply to T3/T4 + GT30 + GT35 plain bearing 3mm  1x oil supply line, 40 cm, with D04 connectors  5x M10 copper nuts made of copper with 17 mm wrench size  4x M8 copper nuts made of copper with 13 mm wrench size  1x turbo manifold Fiat Coupe 20v Turbo 20vT T3 + 38mm WG connection  1x 45° adapter 1/2 NPT > 15mm hose connection  1x elbow is delivered in separate parts for self-welding. Photo is only an example


We adapt the turbo for you so that it can be installed in the vehicle. Due to the limited space in the engine compartment, it may still be necessary to adjust the turbo on the vehicle yourself. To do this, simply loosen the screws on the retaining plates of the turbo and rotate the turbo into its final position. Then tighten the screws again.

---

Technical data turbocharger:
- Compressor housing outer A/R 70 High Flow
- Compressor wheel 82>61.4mm
- Turbine housing 63 A/R
- 360° racing bearings
-  T3 flange (hole dimensions measured at center: 86x45mm)
- oil-cooled

---

- water-cooled
- Shaft is finely balanced
- up to approx. 2 bar

---

suitable for:
- all Fiat Coupe/Marea/Bravo 20vt Turbo 5-cylinder vehicles, including vehicles with air conditioning.

---

 To achieve an output of approx. 450 hp, larger injectors such as 440ccm, a 255L/hr fuel pump are also required and the software (chip) must be adjusted. In addition, reinforced pistons + connecting rods should be installed.