Turbo kit for Fiat Coupe 20v Turbo up to 360 hp T3/T4 + exhaust manifold + WG

Package contents:
  1x metal gasket for T3 flange  2x metal gaskets for 38mm wastegate  1x gasket for T3/T4 oil return  1x high-pressure wide-band clamp 87–79 mm for 76 mm silicone  1x V-band clamp 63.5 mm V2A  1x straight silicone reducer 76x60mm  1x turbocharger T3/T4 60A/R compressor side - 63A/R exhaust side - 360° racing  1x 38mm aluminum CNC-machined wastegate with accessories 0.4 bar  1x M12 ring eye to D04  1x high-pressure wide-band clamp 71–63 mm for 60 mm silicone  1x silicone vacuum hose ø 6mm length  1x metal gasket for Y-pipe flange T3/T4, GT30, GT35  5-hole  5x stud bolts M10x40  4x stud bolts M8x35  1x adapter for oil supply to T3/T4 + GT30 + GT35 plain bearing 3mm  1x oil supply line 40cm with D04 connectors  5x copper nuts M10 copper nuts with 17 mm wrench size  4x copper nuts M8 copper nuts with 13 mm wrench size  1x turbo manifold Fiat Coupe 20v Turbo 20vT T3 + 38mm WG connection  1x 45° adapter 1/2 NPT > hose connection 15mm  1x elbow is delivered in individual parts for self-welding. Photo is only an example

We adapt the turbo for you so that it can be installed in the vehicle. Due to the limited space in the engine compartment, it may still be necessary to adjust the turbo on the vehicle yourself. To do this, simply loosen the screws on the retaining plates of the turbo and rotate the turbo into its final position. Then tighten the screws again.

---

Technical data turbocharger:
- Compressor housing outer A/R 60
- Compressor wheel 71>54.1mm
- Turbine housing 63 A/R
- 360° racing bearing
-  T3 flange (hole dimensions measured from center: 86x45mm)
- oil-cooled

---

- water-cooled
- Shaft is finely balanced
- up to approx. 1.6 bar

---

Suitable for:
- all Fiat Coupe/Marea/Bravo 20vt Turbo 5-cylinder, including vehicles with air conditioning. To achieve a power output of approx. 360 hp, larger injectors such as 440ccm, a 255L/h fuel pump are also required and the software (chip) must be adjusted.