Garrett Turbo Kit for Fiat Coupe 20v Turbo with Garrett GTX2860R turbocharger upgrade up to 400 hp

Contents:
1. Turbocharger Garrett GTX2860R 816364-5001S ball-bearing + water-cooled exhaust housing 64 A/R or 86 A/R please specify when ordering

---

2. Downpipe adapter compatible with the original downpipe

---

3. Oil inlet adapter/oil restrictor + oil line

---

4. Oil return flange with connection to the original return line

---

5. Silicone reducer 76>60mm

---

6. Clamps + Screws

---

Technical data for the turbocharger:
- Compressor housing external A/R 60
- Compressor wheel 60>45.7mm
- Turbine housing 64A/R
- double ball-bearing
- T25 flange (hole dimensions measured from center to center: 73x40mm)
- oil-cooled

---

- water-cooled
- shaft is precision-balanced
- up to approx. 2 bar
- up to 400hp

---

Description:
The ball-bearing Garrett GTX2860R upgrade turbocharger is simply exchanged for the original turbocharger. No modification work, no welding required. A special downpipe flange is included in the kit, which fits directly to the original downpipe. Thanks to the ball bearing, the turbo responds very early. The maximum power with this turbo is approx. 400hp, to achieve this larger injectors,  ø 70mm downpipe, a 255L/h fuel pump, 100 cell catalytic converter, sport exhaust ø 70mm and upgrade intercooler must also be used. So that the engine can withstand the power, steel connecting rods  and forged pistons are required. The engine management must then be adapted to the components.

We adapt the turbo for you so that it can be installed in the vehicle. Due to the limited space in the engine bay, it may happen that the turbo still has to be adjusted manually on the vehicle. For this, you only loosen the screws on the retaining plates of the turbo and turn the turbo into its final position. Then tighten the screws again. 

---

Suitable for:
- all Fiat Coupe 20v Turbo 5-cylinder